KENTON CUBE WITH 2 DRAWERS
A
IMPORTANT: Make sure unfinished edge of drawer side faces forward
B
6A. Attach left drawer side to drawer back and inner drawer front with 4 large screws. Make sure unfinished edge faces forward. Secure, but do not over tighten each screw with a phillips head screwdriver.
B. Slide drawer bottom into slot at bottom of assembly. Repeat Steps A & B for the other drawer.
NOTE:
Make sure front of the drawer glide fits snug to the back face of the drawer front.
8Using a phillips head screwdriver, fasten the small glide from each glide assembly to each drawer side with 3 small screws. Make sure the front of the drawer glide fits snug to the back of the drawer front. Do not over tighten the screws.
Made in China - r07
A
B
C
7A. Attach right drawer side to drawer assembly with 4 large screws.
B. Attach drawer front to drawer assembly with 4 large screws.
C. Attach drawer pull to drawer front with 2 pull screws. Repeat Steps
9Fit small drawer glide hardware into corresponding large glide hardware on the case interior. Applying even pressure to each side of the drawer front, firmly push drawer glides into the case glides.
If the drawer fronts appear uneven or misaligned, open each drawer. Loosen each drawer slide screw enough to allow for movement of the drawer. Make any necessary adjustments to the drawers and
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer. | Page 3 of 3 |
Customer Service