Crate & Barrel Ledge 6-Drawer Dresser and, with, Attach, Attach, top panel, large bolts, small bolts, back panels, bottom panel, allen wrench, allen wrench, small screws, A) Fit dowels of

LEDGE 6 DRAWER DRESSER

left side	partition		NOTE: Do not over
panel		right
			tighten the bolts
		side
		panel

top panel

B

NOTE: Allen wrench can be held at an angle to allow for full rotation when securing bolts

A

B

NOTE: Allen wrench can be held at an angle to allow for full rotation when securing bolts

5A) Position base assembly as shown. Fit dowels of left and right side panels into corresponding holes of bottom panel as shown. Secure left and right side panels with 3 large bolts per side, using an allen wrench. Do not over tighten the bolts.

B) Attach partition to bottom panel with 2 large bolts as shown.

6A) Fit dowels of left and right side panels into corre- sponding holes of top panel as shown. Secure left and right side panels with 3 small bolts per side as shown, using an allen wrench.

B) Secure partition to top panel with 2 small bolts as shown.

back panel

back panel

7Attach 2 back panels to assembled unit with 24 small screws as shown, using a screwdriver.

NOTE: Make sure grooves of top drawer left side panel, back and front are assembled as shown

top drawer back

top drawer left side panel

top drawer front

8Attach top drawer left side panel to top drawer back and top drawer front with 4 drawer screws as shown, using a screwdriver.

Made in Malaysia - r10 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 3 of 4