LOOP 64” PLASMA BACK PANEL
NOTE:
This plasma back panel is intended for placement against a wall using the enclosed anchoring hardware. The included hardware is for mounting the unit to drywall.
Use hardware appropriate to your wall type.
2A) Drill a hole in the wall slightly smaller than the diameter of the plastic wall anchor. Lightly tap with a hammer until the face is flush with the wall.
B) Insert long wood screw through wall anchor strap and into the wall anchor.
C) Insert short wood screw through wall anchor strap and into the top of unit.
Assembly is now complete.
Short | Wall | |
| ||
wood | Wall | |
screw | ||
anchor | ||
| ||
| strap | |
| Plastic | |
| wall | |
| anchor |
Long wood screw
NOTE: Insert screws 3/4"-1" from the edge of the strap
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
NOTE: Contact your television manufacturer to find out the necessary wall mounting bracket and instructions needed to safely mount your TV. Crate and Barrel drivers are not authorized to mount your TV.
Made in China - r01 | Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com | Page 2 of 2 |