Crate & Barrel Octave Four-Drawer Chest and, A) Fit, as shown, partition, partition, top panel, top panel, top panel, back panel, back panel, back panel, large bolts, large bolts, medium bolts

OCTAVE FOUR DRAWER CHEST

medium bolt	B
		NOTE: Do not over
spring washer		tighten the bolts
flat washer
	partition
	B	right side
		panel

A

back panel

1A) With the assistance of another adult, fit back panel into grooves of right side panel as shown.

B) Fit pre-assembled dowels of partition into corresponding holes of right side panel as shown. Using a phillips head screwdriver, secure right side panel with 2 medium bolts,

2spring washers and 2 flat washers as shown. Do not over tighten the bolts.

medium bolt B

spring washer flat washer

partition

B

left side	back
panel	panel

A

2A) Fit back panel into grooves of left side panel as shown.

B) Fit dowels of partition into corresponding holes of left side panel and secure with 2 medium bolts, 2 spring washers and 2 flat washers as shown.

		large bolt
	bottom	spring washer
A	screw	flat washer
NOTE: Do not over		B
tighten the screws

A

B bottom panel

3A) Fit dowels of assembled unit into corresponding holes of bottom panel as shown. Secure, but do not over tighten with 4 bottom screws, using a screwdriver. B) Secure bottom panel to back panel from inside with 2 large bolts, 2 spring washers and 2 flat washers.

A	medium bolt
	spring washer		B flat washer
	flat washer
			spring washer
			large bolt
top panel
	A	B

4A) Fit dowels of assembled unit into corresponding holes of top panel. Secure top panel with 4 medium bolts, 4 spring washers and 4 flat washers as shown. B) Secure top panel to back panel with 2 large bolts,

2spring washers and 2 flat washers.

Made in Vietnam - r04

Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com

Page 2 of 3