QUBE 1-SECTION

NOTE: Make sure arrows on each cam point toward nearest edge with holes

left and right side panels

2Insert 4 cams into 1 left and right side panels as shown. Make sure arrows on each cam point toward nearest edge with holes.

NOTE: Do not over tighten the screws

magnet

top panel

3Attach 1 magnet to top panel with 2 medium screws as shown, using a phillips head screwdriver. Do not over tighten the screws.

foot

bottom panel

4Attach 4 feet to bottom panel with 2 large screws per foot as shown, using a screwdriver.

right side panel

bottom panel

5Position bottom panel as shown. Fit cam screws of bottom panel into corresponding holes of right side panel as shown. Using a phillips head screwdriver, turn cams clockwise until each cam securely engages each cam screw. Repeat for left side panel.

Made in China - r03

Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com

Page 2 of 3