QUBE 1-SECTION

back panel

6Slide back panel into corresponding grooves of assembled unit.

bracket

A

B

door hinge

door

7A) Attach 2 door hinges to door with 2 small screws per hinge as shown, using a screwdriver.

B) Attach 1 bracket to door with 2 small screws as shown.

top panel

door

NOTE: Make sure magnet faces out as shown

peg

8 Fit pegs of door hinge into corresponding hole of

9 Fit cam screws of top panel into corresponding

bottom panel.

 

holes of assembled unit as shown. Secure all cams.

 

 

Assembly is now complete.

 

 

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not

use furniture wax or polish as the wood is finished with a protective clear lacquer.

 

 

 

 

Made in China - r03

Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com

Page 3 of 3