WALKER MEDIA TOWER
1Insert 10 cam screws into both side frames. Secure with a phillips head screwdriver.
| A |
Make sure | x10 |
face up | |
these holes |
|
B
A
2A. Insert 2 cams in the underside of each crossbar. Make sure the arrow on each cam points towards the closest short end of each crossbar.
B. Fit 5 crossbars onto the right side frame, aligning cam screws with corresponding holes. Make sure holes on the side frame face up.
x10
A
3A. Fit 5 crossbars onto the left side frame, aligning cam screws with corresponding holes.
B. Turn cams clockwise using a Philip head screwdriver to secure side frame to crossbars.
Made in China R05
4Assemble the 2 metal cross braces, located in packing foam with red ribbon. Using the allen wrench, tighten 1 small allen bolt to center of cross brace.
Page 2 of 3
Customer Service