WALKER MEDIA TOWER
5With assistance of another adult, turn assembly upright. Attach assembled metal cross brace to back of the bookshelf by fastening 4 small screws into predrilled holes in the frame. Secure each with a screwdriver.
6Adhere 20 small rubber pads to the frames, as illustrated above. Press each firmly to secure.
Small
Large
Large
Large
Small
7Carefully place 1 small glass panel on the top and bottom shelves, and the remaining 3 large glass panels on the middle shelves. Assembly is now complete.
Made in China R05
A
B
Optional Wall Attachment Hardware:
These instructions are for drywall mounting only. For safe mounting it is essential to use the proper hardware for your wall type. Be sure to consult your local hardware store to determine the hardware needed for your wall (plaster, drywall, concrete, etc.) This product is only deterrent. It is not a substitute for proper adult supervision.
A)Drill a pilot hole in the wall slightly smaller in diameter than the drywall anchor. Gently tap anchor with a hammer if necessary until it is flush with the surface of the drywall.
B)Screw the wall bracket to the wall using a large screw. Place the tower in front of the wall bracket. Screw the wall bracket to the top of the side frame using medium screw. Note: Mount to wood studs whenever possible. If screw is aligned with a wood stud, screw directly into the wood stud and do not use the drywall anchor.
CLEANING AND CAREClean surfaces with a dry or damp soft cloth. Use glass cleaner on shelves as necessary. Do not use abrasive cleaners.
Page 3 of 3
Customer Service