WALKER MEDIA STAND
HARDWARE
Thank you for purchasing the Walker Media Stand. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
6 - cam 6 - cams 1 - bolt
screws
4 - screws | 15 - rubber pads |
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
Phillips head screwdriver
COMPONENTS
1 - inner metal cross brace (threaded center hole)
1 - left side frame
1 - outer metal cross brace
1 - right side frame
3 - crossbars
Made in China r03
1 - middle glass shelf (larger)
2 - top & bottom glass shelves (smaller)
1Insert 3 cam screws into each side frame as shown. Secure, but do not over tighten, with a phillips head screwdriver.
Page 1 of 3
Customer Service