WALKER MEDIA STAND
Arrow points towards nearest edge with hole
2Insert 2 cams into each crossbar as shown. Make sure arrow on each cam points towards the nearest edge with a hole.
3Fit each cross bar onto the cam screws of the left side frame as shown. Secure each cam by turning clockwise with a phillips head screwdriver until each cam securely engages each cam screw.
4Fit crossbars onto cam screws of right side frame. Secure each cam by turning clockwise with a phillips head screwdriver.
Made in China r03
A
B 
C
5 Place assembly upright and turn it around.
A.Attach the inner metal cross brace (brace with threaded center hole) to the side frames with 2 screws as shown. Secure with a phillips head screwdriver.
B.Fit outer metal cross brace over inner metal cross brace and fasten to side frames with 2 screws.
C.Fasten cross brace intersection with 1 bolt. Secure with
screwdriver.
Customer Service