BV412RVB/SVB Guitar Enclosure
The Input/Output Plate:
(1)Impedance Selector Switch: Use this switch to select 16 ohm mono operation or 8 ohm stereo/4 ohm mono operation.
(2)Out 1/4” Jack: When using the cabinet in the mono operating mode, use this jack to connect the cabinet to another speaker enclo- sure of the same impedance.
(3)In/Left 1/4” Jack: When using the cabinet in the mono operating mode, use this jack as the cabinet’s input jack. Connect the output of your amplifier to this jack by means of the 14 gauge speaker cable pro- vided.
When using the cabinet in the stereo operating mode, connect this jack to the left channel output of your amplifier.
(4)Right 1/4” Jack: When using the cabinet in the stereo operating mode, connect this jack to the right channel output of your amplifier.
When using the cabinet in the mono operating mode, this jack is not used.
Refer to the illustrations to the right for additional information.
1 | 2 | 3 | 4 |
4 Ohm Mono Configuration:
|
| OUT |
| Mono Amplifier |
16 OHM | 4 OHM |
|
|
|
16 OHMS | 4 OHMS | OUT | IN | BV412RVB/SVB |
MONO | MONO |
|
| Input plate |
| 8 OHMS |
| LEFT | RIGHT |
| STEREO |
| ||
|
|
|
| |
16 Ohm Mono Configuration: |
|
| ||
|
| OUT |
| Mono Amplifier |
16 OHM | 4 OHM |
|
|
|
16 OHMS | 4 OHMS | OUT | IN | BV412RVB/SVB |
MONO | MONO |
|
| Input plate |
| 8 OHMS |
| LEFT | RIGHT |
| STEREO |
| ||
|
|
|
| |
8 Ohm Stereo Configuration: |
|
| ||
|
| LEFT OUT | RIGHT OUT | Stereo Amplifier |
16 OHMS | 4 OHMS | OUT | IN | BV215RVD |
MONO | MONO |
|
| Input plate |
| 8 OHMS |
| LEFT | RIGHT |
| STEREO |
| ||
|
|
|
|