CRATE CR-1 LIMITED EDITION GUITAR AMPLIFIER
6 | 7 |
The Front Panel (continued):
6.Line Out: Use this jack to send a line level signal from the amplifier to a mixing board, external amplifier or powered monitor, or a recording device.
WARNING: Do not attempt to use headphones in the Line Out jack!
7.Power: Use this switch to turn the amplifier on (toggled down) and off (toggled up). The red lamp above the paddle illuminates when the amplifier is turned on.
The Rear Panel (not shown):
8.AC Line Cord: The grounded power cord should only be plugged into a grounded power outlet that meets all applicable electrical codes and is compatible with the voltage, power, and frequency requirements stated on the rear panel. Do not attempt to defeat the safety ground connection.
5
