GX-900H/GX-2200H
by
The Rear Panel:
19 | 20 | 21 | 22 | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
19.EFFECTS LOOP LINE OUT: Sends a signal out to your effects devices or signal processors. Lets you add effects, with lowest noise. Uses a shield- ed signal cable with mono 1/4” plugs. Also doubles as a source for a
20.EFFECTS LOOP LINE IN: Re- ceives the signal from your effects or processors. Uses a shielded cable with mono 1/4” plugs. Also doubles as a direct feed to the power amp section, bypassing the input and preamp stages. Useful for “slaving” a pair of amps together.
21.SPEAKERS: Connects the amp to your speaker cabinet(s). Uses speaker cables with mono 1/4” plugs. These jacks are wired in parallel. Make sure that your speaker combination never totals less than 2 ohms! Use the chart below to help determine parallel loads. If in doubt, ask your dealer.
| CAB IMP | # CABS TOTAL IMP |
| |
|
| |||
| 4 ohms | 2 | 2 ohms |
|
| 8 ohms | 2 | 4 ohms |
|
| 8 ohms | 4 | 2 ohms |
|
| 16 ohms | 2 | 8 ohms |
|
| 16 ohms | 4 | 4 ohms |
|
| 16 ohms | 8 | 2 ohms |
|
|
|
|
|
|
22.POWER CORD: Connects the amp to a grounded AC power outlet. Use only a grounded outlet! DO NOT defeat the ground prong of the cord! If the amplifier is used outside of the United States, see the area’s Crate deal- er for the proper power cord or consult a local professional electrician.
5
