VTX30 Two-Channel Guitar Amplifier with DSP

TABLE OF CONTENTS:

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

The Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .4,5

The Bottom Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .5

The DSP Section . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

System Block Diagram . . . . . . . . . . . . . . . . . . . . . . .7

Technical Specifications . . . . . . . . . . . . . . .back cover

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequen- cy energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. However, there is no guarantee that interference will not occur in a par- ticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this device not expressly approved by SLM Electronics could void the user’s authority to operate the equipment under FCC rules.

 

Declaration of Conformity

Manufacturer’s Name:

SLM Electronics

Corporate Headquarters:

1901 Congressional Drive, St. Louis, Missouri 63146

Primary Production Facility:

700 Hwy 202 W, Yellville, Arkansas, 72687

Product Type:

Audio Amplifier

Products meet the regulations for compliance marking under: ETL standards UL6500, UL60065, or UL813 CSA standards E60065 or C22.2 No.1-M90 CE safety standard EN60065

CE EMC standards EN55103 or EN55013 and EN61000 C-tick designation Level 2, ABN #56748810738, ARBN# N222 KETI standard K60065 (limited model approval)

Compliance Support Contact: SLM Electronics, Attn: R&D Compliance Engineer

1901 Congressional Drive, St Louis, Missouri, 63146 • Tel.: 314-569-0141, Fax: 314-569-0175

Page 2
Image 2
Crate Amplifiers VTX30 manual Table of Contents

VTX30 specifications

The Crate Amplifiers VTX30 is a powerful and versatile combo amplifier designed specifically for guitarists who seek a rich and dynamic sound. With its advanced features and innovative technologies, the VTX30 stands out as a reliable choice for both practice sessions and live performances.

One of the main features of the VTX30 is its 30-watt output, which is perfect for practice environments and small gig settings. This power delivers a punchy and clear tone, allowing musicians to cut through the mix effectively. The amplifier is equipped with a 12-inch speaker that enhances the overall sound quality, providing a balanced response across the frequency spectrum.

The VTX30 incorporates a unique Variable Tone Control (VTC) system that allows players to shape their sound with remarkable precision. This feature enables users to customize their settings, from warm, vintage tones to brighter, more modern sounds. Alongside the VTC, the amplifier includes an adjustable tone stack, further enhancing its tonal versatility.

Furthermore, the VTX30 is equipped with built-in digital effects, including reverb and delay, which add depth and dimension to your sound. Musicians can experiment with these effects to create their signature tone, all while maintaining a straightforward user interface that does not overwhelm.

In terms of connectivity, the VTX30 is designed with versatility in mind. It includes an auxiliary input for jamming along with backing tracks or other audio sources. Additionally, it features a headphone output, allowing for silent practice without disturbing others.

The rugged construction of the VTX30 ensures durability, making it suitable for both home use and the rigors of the road. Its classic black tolex covering and metal corners not only provide protection but also add to its aesthetic appeal.

With all these features combined, the Crate Amplifiers VTX30 offers exceptional sound quality and user-friendly design, making it an ideal choice for guitarists at all levels. Whether you’re practicing at home, recording in the studio, or performing live, the VTX30 delivers the performance and reliability that musicians demand. This amplifier truly embodies the spirit of modern guitar amplification, catering to a wide range of styles and preferences. It’s a worthy addition to any guitarist’s setup, ensuring that your sound is always at its best.