XK100 Keyboard Amplifier
10
17 18
11 |
12 |
19 20
13 |
|
| 15 |
14 |
|
|
21 | 22 | 23 |
|
|
16 |
9.INPUT: Use this 1/4” jack to connect a keyboard or other line level signal to the corresponding chan- nel by means of a shielded instrument cable.
10.EQUALIZATION: Use this
11.REVERB RETURN: Use this control to adjust the overall amount of reverberation applied to the output signal. This control works in conjunction with each channel’s Rev/Eff control (#5).
12.LEVEL: Use this control to adjust the overall output level of the amplifier.
13.EFFECTS RETURN: Use this control to adjust the amount of external effect (if used) from the Patch Bay Send and Return (#17, 18). This control works in conjunction with each channel’s Rev/Eff control (#5).
14.LINE OUT / HEADPHONES LEVEL: Use this control to adjust the level of the signal at the Bal. Line Out jack (#21) and the 
(headphones) jack (#22). This control functions independently from the Master Level control (#12).
15.ON: This LED illuminates when the amplifier is turned on.
16.(POWER): Use this switch to turn the amplifier on (top of the switch depressed) and off (bottom of the switch depressed).
17.SEND: Use this jack to send a signal from the amplifier to an external effects device. The signal at this jack is
18.RETURN: Use this jack to return a signal to the amplifier from an external effects device. The amount of effect applied from the Send and Return jacks to the signal is governed by the Effects Return control (#13).
5
