|
| XK100 Keyboard Amplifier | |
| XK100 TECHNICAL SPECIFICATIONS: | ||
|
|
|
|
|
|
|
|
| Maximum Signal Accepted | Ch. 1 High Z: 10 volts peak to peak; Low Z: 15 volts peak to peak | |
|
| Ch.’s 2, 3 and 4: 10 volts peak to peak | |
|
|
|
|
| Input Power Requirements | 115 VAC, 60Hz, 110VA | |
|
| 100/110VAC, 50/60Hz, 110VA | |
|
| 230VAC, 50/60Hz, 110VA | |
|
|
|
|
| Nominal Input Impedance | Ch. 1 High Z: 10k ohms; Low Z: 600 ohms | |
|
| Ch’s 2, 3 and 4: 24k ohms | |
|
|
|
|
| Gain | Ch. 1: High Z: 64dB; Low Z: 70dB; Ch. 2: 57dB; | |
|
| Ch. 3: 57dB; Ch. 4: 57dB | |
|
|
|
|
| Output Power Rating | 100 watts @ 5% THD w/4 ohm load | |
|
|
|
|
| Rotary EQ Range | Channel 1: 15dB @ 100Hz, 23dB @ 10kHz | |
|
|
|
|
| Master EQ | ±14dB @ 100Hz, 330Hz, 1kHz, 4kHz and 10kHz | |
|
|
|
|
| Line In/Line Out | 1 volt RMS | |
|
|
|
|
| Limiter Range | 20dB, maximum distortion 1% | |
|
|
|
|
| Speaker Size and Rating | 15” Crate Custom Design w/2.5” voice coil and 56 oz. magnet | |
|
| 2 HF drivers | |
|
|
|
|
| Cabinet Size and Weight | 24.5” H x 21” W x 18.25” D, 69 lbs. | |
|
|
|
|
|
|
|
|
www. crateamps.com
©2004 SLM ELECTRONICS, A DIVISION OF ST. LOUIS MUSIC, 1400 FERGUSON, ST. LOUIS, MO. U.S.A. 63133
P/N
