Using PC-CAM 600 as a Digital Camera 26
Recording Videos
To start recording a video, do the following:
1. Press the Operation Mode button to select the Video Recording mode .
2. Aim the camera at the desired object, and use the camera’s viewfinder to verify
that the object is in the camera’s view.
Note: The object should be at least 75 cm (30 inches) away from the camera.
3. Hold the camera still and press the Snapshot button.
A beep sound is heard at the start of the recording.
The Video Recording mode icon flashes to indicate that the recording has begun.
4. The front red LED lights up and the camera-ready green LED indicator blinks. At
this point, do not shake the camera. When the video is complete, the indicator
will go off.
Audio recording is enabled automatically during video recording.
5. Press the Snapshot button once more to end the recording.
A beep sound is heard at the end of the recording.
6. The recorded video taken is stored in the camera’s memory, and the counter
value increases by one.
In Video Recording mode, the
camera’s flash is
automatically disabled.