2. Installing Your Camera

Step 1: Installing drivers and software

DO NOT connect the camera to your computer yet!

1.Do not connect the camera to your computer before installing the drivers.

If you accidentally begin installation with your camera connected, the Add New Hardware Wizard or Found New Hardware dialog box may appear. Click the Cancel button and disconnect your camera from your computer.

2.Insert the Installation CD into your CD-ROM drive. Your CD should start automatically. If it does not, follow the steps below:

i.Start Windows Explorer.

ii.On the left pane, click My Computer.

iii.Right-click the CD-ROM/DVD-ROM drive icon, and then click AutoPlay.

3.Follow the instructions on the screen to complete the driver installation.

4.Repeat steps 2 to 3 to install the software.

5.Restart your computer after the software is installed.

Step 2: Installing hardware

1.Slide the lens cover to the left to turn on your camera.

2.Press and hold the Mode button until the Mode menu appears on the LCD screen.

3.Use the Function keys to select the PC Mode icon.

4.Press the Set button.

5.Use the Function keys to select Mass Storage.

6.Press the Set button. The USB Connection icon flashes on the LCD screen.

7.Open the USB port cover.

8.Connect the provided USB cable to your camera and computer’s USB ports as shown below.

9.Windows automatically detects the camera and your camera appears as a removable disk in Windows Explorer.

11