Creative 920 Slim Step 3: Inserting the batteries, Notes:, remaining battery power

Step 3: Inserting the batteries

1.Disconnect and turn off your camera.

2.Gently slide open the battery cover. a.

b.

3.Insert two AAA alkaline batteries according to the polarity directions shown on the battery cover.

4.Close the battery cover.

Notes:

•If the remaining battery power icon on the LCD screen displays one bar, your camera’s flash light is disabled. For more information on your LCD screen’s icons, see “LCD screen icons” on page 9.

•If your batteries are depleted, the remaining battery power icon turns red and your camera is turned off.

•Your camera’s date and time is stored for approximately three minutes when the batteries are removed. If you remove the batteries for longer than three minutes, you will have to reprogram the date and time. For more information, see “To set the date and time” on page 22.

12