Creative HS-1200 manual Technical Specifications, Headphone, Microphone, System Requirement

USB Transceiver – 60 g

Digital Wireless Headset – 155 g

•Do NOT operate the Digital Wireless headset system with other power adaptors. Contact Creative Customer Support should you need a replacement power adaptor.

•Do not attempt to service any part of the digital wireless headset / USB transceiver yourself as opening or removing covers may exposed you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Technical Specifications

•Digital Wireless Technology: Proprietary 2.4 GHz Radio Frequency for advanced 2-way transmission.

•Range: Up to 22 meters * (72 feet *) in a typical environment.

•Listen Time (per charge): Approximately 8 hours.

•Standby time: Up to 3 months.

•  Charging time: 2.5 hours

•Charging Method: Through USB powered Transceiver DC out.

•Battery type: Lithium polymer

•Low battery indication: 3 beeps repeated every 5 seconds.

•Connectivity: USB 1.1

•USB Cable length: 80 cm/2.6 feet.

• Net Weight (without packaging):

Headphone

•Driver: 40mm Neodymium magnet.

•Frequency Response: 20 Hz ~ 20 kHz.

•Impedance: 32 ohm

Microphone

•Type: Noise cancelling condenser

•Frequency Response: 100 Hz-16 kHz

•Impedance: <10 kohm

System Requirement

•Intel® Pentium® 4 1.6 GHz, AMD® Athlon XP 2000+ processor or faster

(Pentium® 4 2.2 GHz, AMD® Athlon XP 2400+ processor or faster recommended)

•Intel®, AMD® or 100% compatible motherboard chipset

•Microsoft® Windows VistaTM 32-bit or 64-bit, Windows® XP Professional x64 Edition, Windows® XP Service Pack 2 (SP2)

•512 MB RAM

•600 MB of free hard disk space

•CD/DVD-ROM drive

•One available USB port (for the USB transceiver)

•Installed and launched Windows LiveTM Messenger or MSN® Messenger to answer / end     calls. SkypeTM requires manual configuration.