Troubleshooting 18
My remote control is not responding.
•Your remote control’s battery may have depleted. To remove and replace the battery, see “Replacing the remote control battery” on page 15.
Also check the following:
•You have installed the transmitter software.
•In the Remote Control Settings application, ensure that the Enable control of Windows Application check box is selected. To launch this application, click Start
•The media player that you are using must be the highlighted window for the playback functions to work.
I need to change the wireless zone numbers of my receivers.
Do the following:
i.Return the receivers to factory default settings. See “Returning to factory default settings” on page 14.
ii.Manually pair the receivers. Follow the steps in “Manual Pairing” on page 8.
All kinds of sounds from my computer are transmitted to the receiver.
Your transmitter streams all sounds from your computer to the receiver, including sounds from other programs, as well as system sounds and alerts. Disable these sounds, or close programs that generate unwanted sounds.