Step 3:

Transferring

Audio and

Data

To listen to transferred audio tracks, your player must be in Music mode. For more information, refer to "Using Your Player" on page 3-1.

If you wish to download additional music tracks to your player, you can either download music tracks from Internet music sites (see "Downloading from the internet" on page 2-6)or rip them from your audio CDs to create digital files on your computer. For more information, see "Ripping From A CD" on page 2-7.

Music files can be encoded into the supported formats (MP3 or WMA file formats), then transferred to your player with Creative MediaSource Organizer.

Data files can also be transferred and stored in your player, for example, you can transfer a large data file from one computer to another.

To transfer audio and data with Creative MediaSource

1.Connect your player’s USB Flash Drive to your computer’s USB port.

2.Launch Creative MediaSource on your computer.

3.On the left pane, locate and select the files you want to transfer to your player. Using the standard drag-and-drop method, transfer the files to your player.

For information about transferring DRM protected WMA files, refer to "Digital Rights Management" on page C-3.

4.After the transfer is complete, make sure you stop your player properly before disconnecting it from your computer. For more details, see "Step 4: Stopping Your Player Properly" on page 2-8.

Getting Started 2-5