Creative Labs 550 Connecting an, Additional, Device, MUTE, MUTE, MASTER, TREBLE, SUBWOOFER, Headphones Output, Auxiliary Analog Stereo Input

MWorks THX 550 front_cle.book Page 3 Friday, September 26, 2003 12:14 PM

Using headphones

❒For private listening, you can connect headphones to the Headphones Output of the remote control.

This will mute all speakers.

❒Select MASTER volume mode to adjust the volume of your headphones.

❒Select TREBLE mode to adjust the treble levels of your headphones.

❒Select SUBWOOFER mode to adjust the bass levels of your headphones.

Notes

•When you disconnect your headphones from the Headphones Output, the speaker system will revert to the default MASTER volume setting (two Level Indicators lit), so as to prevent high headphones volume levels from being applied to the speaker system.

•REAR mode and CENTER mode are disabled when you are using headphones.

Muting the volume

❒To temporarily mute speakers or headphones, press the MUTE button once.

All lit Level Indicators will blink during mute mode.

❒To return to normal listening, press the MUTE button again. Alternatively, you can disable

mute mode by pressing either or .

Connecting an

Additional

Device

You can connect a second audio program source, such as a Creative digital audio player, to the Auxiliary Analog Stereo Input.

3