INSTALLATION INSTRUCTIONS
CONNECTING TO GAS SUPPLY
The appliance is designed to be connected with an approved flexible connection to BS 669.
A length of 1.25 to 1.55m is recommended. An adaptor backplate should be fitted in the area shown to allow the appliance to be pushed fully back into the space between the cabinets. The flexible hose should be fitted such that it does not pass through a space where it is likely to become trapped or damaged.
The temperature rise of areas at the rear of the appliance that are likely to come into contact with the flexible hose do not exceed 70˚C.
140mm |
500mm |
640mm |
460 mm |
Dimensions are with the feet adjusted to their minimum level.
22
