Creda D010E Something Wrong?, Problem, Check, see Back Cover, Nothing works, Display shows, panel

Models: D010E

1 32
Download 32 pages 59.68 Kb
Page 30
Image 30
Something Wrong?

Something Wrong?

Before calling a Service Engineer, please check through the following lists.

THERE MAY BE NOTHING WRONG.

Problem

Check

 

 

Nothing works.

(a) Check

 

If you find :-

 

Display is blank.

 

Then it is likely that there is no electricity supply to your oven.

 

Check: (i) That the main cooker wall switch is turned on.

 

(ii) Check other appliances to see if you have a power cut.

 

(iii) Check the main circuit breaker for the property.

 

(iv) With the selector switch (A) turned to ‘fan oven’

 

the oven light does not illuminate.

 

 

Display shows 0.00

The power supply to your oven has possibly been interrupted, but has

 

now come back on again. Reset the timer to the correct time of day

 

(see ‘Clock/Minute Minder’ section).

 

 

Oven and Grill do not work.

Operating the cooker under the following conditions may cause a safety

 

device to operate.

 

(a) Grilling with the door closed - always grill with the door open to

 

the correct position - see grilling.

 

(b) Grilling for an excessively long period at maximum setting -

 

see grilling guide.

 

(c) Grilling with inadequate ventilation in the cabinet - see

 

installation instructions.

 

 

Oven does not work.

Check that the selector switch (A) is set to ‘FAN OVEN’ and that the

 

temperature control (B) is set to the correct temperature.

 

 

Grill does not work.

Check that you have selected :- ‘GRILL’ function on the Oven/Grill Select

 

 

knob (A) and a Grill setting on the Temperature Control Knob (B) (see

 

grilling page).

 

 

Grill keeps turning on and off.

When the Temperature Control knob (B) is operating at less than "6", the

 

grill will cycle on and off, this is normal and is not a fault.

 

 

Draught from beneath control

A gentle flow of air will be blown from beneath the control panel when

panel.

the appliance is used. If the appliance is still warm, this

 

cooling fan may run on, or restart itself after all of the controls have been

 

turned off.

 

The fan will stop once the appliance has been cooled. This is

 

normal and not a fault.

 

 

Timer buzzer/bleeper operates

Buzzer/Bleeper should stop automatically after several minutes.

continually

To cancel press the ‘-’ button.

 

 

 

If you have been through the above list and there is still a problem, contact your Local Service Office

(see Back Cover)

30

Page 30
Image 30
Creda D010E Something Wrong?, Problem, Check, see Back Cover, Nothing works, Display shows, Oven and Grill do not work