v. Fitting the Door Panel...
The packaging is designed to make it possible to mount the wooden panel onto the appliance without removing it completely.
●The wooden panel that
covers the face of the machine must not be less than 18mm in thickness and can be hinged on either side.
For practical reasons, it is advisable to maintain the same opening direction as the appliance door itself (hinges applied to the left hand side).
DOOR MOUNTING ACCESSORIES:
6 x type A self threading screws 1=13mm
2 x type B metric countersunk screws 1=25mm, for fastening the magnet plate to the cabinet
4 x type C metric screws 1=15mm, for mounting the hinge supports to the cabinet
4 x type D metric screws 1=7mm, for mounting the hinges on the supports
8
