Technical information for the fitter

Recommendations

•When you have removed the packing, check whether the appliance is intact. If you have any doubts, contact a qualified professional before using the appliance.

•Never leave the packing components (plastic bags, polystyrene foam, nails, etc.) within the reach of children since these are a source of potential danger.

•The installation and electrical connection of your appliance should be performed by an authorised fitter or equivalent qualified technical serviceman.

•In the event of damage during transportation, do not commission the appliance.

•If the appliance is faulty, unplug it from the mains electricity supply and call your nearest authorised after-sales service centre.

•The latter denies all responsibility for improper installation which may harm persons and animals and damage property.

Installation

•This hob can be built into a worktop simply by cutting out the corresponding slot.

•The worktop must be made with a material designed to withstand a temperature of approximately 100°C.

•The hob should be positioned at least 40 mm away from the back wall or any other vertical surface in order to allow for correct ventilation and to prevent the surfaces around the appliance from overheating.

•If you wish to install the hob on top of an oven, the latter must be fitted with a cooling fan.

•Try to avoid installing the hob on top of a dishwasher; if this is unavoidable, place a watertight separating element between the two appliances.

48

560 +/-1

595

10

510

 

1

 

-

490

+/

 

Distance to keep between the cut-out slot and

the cabinet

Fastening

Your hob is supplied with a seal.

Make sure it adheres perfectly to the lower surface of the hob frame. It is extremely important that the seal covers all the hob corners completely and that it seals the latter perfectly along all its perimeter to ensure the full airtightness between the hob and the worktop in order to prevent any accidental spills from penetrating the furniture cabinet beneath the hob.

Very important: It is vital that you ensure the glass ceramic hob is built into a perfectly flat supporting surface. Deformations due to improper fastening could alter the characteristics of the hob and compromise its performance.

The fastening springs are fastened by Torx screws (see diagram on the next page).

To remove the hob from its place of installation, you should either unscrew the Torx screws at the front or the Torx screws at the back.

This is why it is vital that these screws be kept accessible at all times.

Insert the hob into the cut-out slot, applying pressure all along the perimeter of the hob frame so that the latter adheres fully to the worktop.

- 6 -

Page 5 Page 7
Page 6
Image 6
Creda S911E manual Technical information for the fitter, Recommendations
Page 5 Page 7

S911E specifications

The Creda S911E is a versatile and efficient electric storage heater designed to provide optimal heating solutions for homes and commercial spaces. This model stands out due to its advanced technologies and user-friendly features, making it a popular choice among homeowners seeking to enhance their comfort while maintaining energy efficiency.

One of the primary features of the Creda S911E is its exceptional heat retention capabilities. The heater is equipped with high-quality ceramic core materials that effectively store heat during off-peak hours, releasing it gradually throughout the day. This characteristic allows users to benefit from lower energy costs by utilizing cheaper electricity tariffs, particularly during the night.

The S911E also features a built-in thermostat that ensures precise temperature control. Users can easily set their desired temperature, and the heater will automatically adjust its output to maintain a consistent warmth without unnecessary fluctuations. This promotes not only comfort but also extends the lifespan of the heating unit by preventing overheating.

Additionally, the Creda S911E comes with an integral fan that provides fast heat-up times and enhances the distribution of warmth throughout the room. This fan-assisted technology ensures that hot air circulates effectively, eliminating cold spots and providing an even temperature across the space.

Another noteworthy characteristic of the S911E is its sleek and modern design. The heater is available in various finishes, making it easy to blend seamlessly with any interior décor. Its compact form factor also allows for easy installation in various locations, such as bedrooms, living rooms, or hallways.

For added convenience, the Creda S911E is equipped with a user-friendly control panel. This panel allows users to program the heater according to their schedules, enabling them to pre-set heating times to align with their routines. This smart feature optimizes energy consumption and contributes to lower utility bills.

In terms of safety, the Creda S911E includes built-in features such as over-temperature protection and a thermal cut-out, ensuring that the heater operates safely without the risk of overheating.

With its impressive combination of efficiency, advanced technology, and user-centric design, the Creda S911E is an exceptional choice for anyone looking to invest in a reliable electric storage heater that delivers warmth and comfort while minimizing energy costs.
Top Page Image Contents