Energy Saving Tips

The energy we use to heat, light and power our homes contributes over a quarter of the UK's carbon emissions, the principle contributor to climate change.

Around half the energy used in the home is for heating and hot water, so using your heating system efficiently will not only help the environment, but also save you money !

Energy efficiency tips for heating and hot water 1. Don't set the temperature too high…

By reducing the thermostat setting by just 1ºC can reduce your energy use by as much as 10%. And if you're going away for the winter, leave the thermostat on the frost protection setting to provide protection from freezing at a minimum cost.

2. Use it where you need it…

Set the appropriate temperature on your heaters for the room they are in; for example, leave the thermostat on a heater in a spare bedroom on a lower setting.

Other Energy Saving Tips for Around the Home

1. Lights

Turn off lights whenever you leave a room for more than ten minutes.

Use low-energy bulbs wherever you can as they use less than a quarter of the electricity used by ordinary light bulbs and last ten times longer!

2. Cooking

Use the right size pan for the food and cooker hob.

Keep saucepan lids on - this enables you to turn down the heat.

3. Use it when you need it…

Use heaters fitted with timers or linked to central controllers to turn the heating on only when you need it and automatically switch it off when you don't.

4.Curtains…

Close your curtains at dusk to stop heat escaping through the windows.

5.Windows…

Nearly 25% of heat loss can occur through poorly insulated frames and single glazing. If you can't afford to double glaze all your windows, go for the rooms you heat most.

6. Treat your hot water tank...give it a jacket

An insulating jacket for hot water tanks only costs a few pounds and pays for itself within months. Fit one that's at least 75mm (3") thick and you could save £10-£15 a year.

7. Water

Use a shower if you have one to save time, money and water.

Don't set the thermostat too high on your water heater - 60°C/ 140°F is usually adequate for bathing and washing.

Put the plug in when running hot water in your sink - leaving hot taps running is both wasteful and expensive.

Ensure dripping taps are repaired quickly. In just one day, you could waste enough water to fill a bath.

The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility c(EMC) EN55014, EN60555-2 and EN60555-3 which cover the essential requirements of EEC Directives 73/23 and 89/336

Applied Energy Products Ltd

UK customer help line

 

 

Morley Way,

 

Customer Services:

Tel.

+44(0)8709 000430

Peterborough

 

 

 

 

 

 

 

Fax.

+44(0)1733 310606

Cambridgeshire

 

 

PE2 9JJ

 

 

e-mail

technical.services@applied-energy.com

 

 

 

 

 

INCPUKP5RG Issue 0

Page 4
Image 4
Creda TPR2-1000W, TPR2-1500W, TPR2-750W, TPR2-1250W, TPR2-2000W dimensions Other Energy Saving Tips for Around the Home

TPR2-1000W, TPR2-2000W, TPR2-1250W, TPR2-750W, TPR2-1500W specifications

The Creda TPR2 series of electric heaters, including models TPR2-1500W, TPR2-2000W, TPR2-1250W, TPR2-750W, and TPR2-1000W, epitomizes modern heating technology designed to provide efficient, reliable, and user-friendly temperature regulation for residential and commercial spaces.

One of the standout features across the TPR2 range is the unique precision temperature control. This technology ensures that the heaters maintain a consistent and comfortable temperature while consuming minimal energy. Users can easily adjust the temperature settings according to their preferences using the intuitive digital display. The heaters also feature multiple heating settings, enabling users to choose the intensity of heat based on their immediate needs.

Energy efficiency is a hallmark of the Creda TPR2 models. Each model is designed to deliver rapid warm-up times, ensuring that spaces reach desired temperatures swiftly without excessive energy consumption. The heaters utilize advanced thermal technology and insulation materials, enhancing their performance and reducing heat loss. Consequently, they are suitable for use in various settings, from cozy homes to larger office environments.

Another key characteristic is the space-saving design. The sleek and compact form of the TPR2 heaters allows for strategic placement in any room, making them a practical choice even in smaller spaces. Additionally, the wall-mountable option provides further versatility in installation, freeing up valuable floor space while maintaining aesthetic appeal.

Safety features are paramount in the design of the TPR2 models. Each unit includes overheat protection and tip-over safety switches, ensuring that the heaters operate safely under all circumstances. The cool-touch exterior also adds a layer of safety, preventing accidental burns during operation.

With models ranging from 750W to 2000W, the TPR2 series can cater to various heating requirements. Whether you need a smaller heater for a personal space or a more robust unit for larger areas, Creda offers suitable options. Each heater is designed to deliver durable performance, ensuring they are a long-term investment for comfort and warmth.

In summary, the Creda TPR2 series offers a combination of advanced technology, energy efficiency, space-saving design, and essential safety features. This makes them a reliable choice for anyone seeking effective heating solutions without compromising on safety or style.