Creek Audio CD53, CD50 Connecting the Compact Disc Player, Line OUT Sockets, Digital Output

CD53 & CD50 Compact Disc Player

CONNECTING THE COMPACT DISC PLAYER

CAUTION

Before connecting or disconnecting a unit from your audio system, make sure that you switch off the power to each component.

Ensure that you make the correct connections, paying attention to the L (left channel) and R (right channel) marks. Plug in the cable securely. Loose connections will result in unsatisfactory sound reproduction or noise problems.

If this unit interferes with the tuner, switch it off during tuner operation.

1.LINE OUT SOCKETS

Connect one end of the interconnect cable to the unit's AUDIO OUTPUT sockets and the other end to the sockets labelled CD or AUX, or to other line inputs on the amplifier.

Do not connect it to the amplifier's PHONO input if a phono circuit is installed.

2.DIGITAL OUTPUT

This output enables you to connect the CD player to a stand-alone D to A converter in order to change the signal into a stereo analogue one. The digital output can be accessed via the co-axial SPDIF socket on the rear panel.

3.AC POWER SOCKET, IEC TYPE

220V-240 V AC or 110V-120 V AC

4.AC POWER CORD

After completing the installation and all connections, make sure that the POWER switch on the back panel of the unit is set to OFF (O).

Then plug the power cord into a live AC outlet.

Power	Balanced	Un-balanced
on/off	Audio Output	Audio Output
switch I / 0	CD53 only

Digital Output

Optical and

Co-Ax

CD53 and CD50 CD Player

A C Mains

Fuse

A C Mains

Input

Integrated stereo amplifier

WARNING

UNAUTHORISED RECORDING OF COPYRIGHT MATERIAL MAY VIOLATE APPLICABLE COPYRIGHT LAWS. THE DISTRIBUTOR ASSUMES NO RESPONSIBILITY FOR THE UNAUTHORISED DUPLICATION, USE OR OTHER ACTS, WHICH INFRINGE UPON THE RIGHTS OF COPYRIGHT OWNERS.

4