SPECIFICATION
MOVING MAGNET |
| |
GAIN | 37dB | |
FREQUENCY RESPONSE | 20 Hz to 20 kHz +/- 0.25 dB | |
SIGNAL TO NOISE RATIO | ||
TOTAL HARMONIC DISTORTION | < 0.03% | |
RIAA DEVIATION | +/- 0.5% | |
OUTPUT | 250 mV | |
OUTPUT IMPEDANCE | < 100 Ω | |
INPUT SENSITIVITY/IMPEDANCE | 3.5 mV / 47 kΩ/220 pF | |
OVERLOAD MARGIN | 22 dB | |
MATES WELL WITH MM CARTRIDGES | 2.5 mV - 5 mV output | |
MOVING COIL |
| |
GAIN | 56 dB | |
FREQUENCY RESPONSE | 20 Hz to 20 kHz +/- 0.25 dB | |
SIGNAL TO NOISE RATIO | - 75 dB | |
TOTAL HARMONIC DISTORTION | < 0.05% | |
RIAA DEVIATION | +/- 0.5% | |
OUTPUT | 250 mV | |
OUTPUT IMPEDANCE | < 100 Ω | |
INPUT SENSITIVITY/IMPEDANCE | 0.5 mV / 1000 Ω/3300 pF | |
OVERLOAD MARGIN | 20 dB | |
MATES WELL WITH MC CARTRIDGES | 0.5 mV - 1 mV output | |
DIMENSIONS | 150 x 100 x 66 mm | |
POWER SUPPLY VOLTAGE | 24V DC 30 mA | |
|
|
|
WARRANTY
If within two years of the purchase date your OBH product proves to be defective for any reason other than accident, misuse, neglect, unauthorised modification or fair wear and tear, Creek Audio Ltd will, at its discretion, replace the faulty parts without charge for labour or return carriage within the U.K.This warranty is valid only within the U.K. and given in addition to statutory rights. Service enquiries outside the U.K. should be addressed first to the supplying dealer and or Creek distributor/importer. Warranties granted in these countries are entirely at the discretion of the distributor.
Creek Audio Limited
12 Avebury Ct, Mark Road, Hemel Hempstead HP2 7TA England
Telephone: +44 (0) 1442 260146 Fax: +44 (0) 870 622 0846
Creek OBH 15
Phono Pre-Amplifier
Operating
Instructions
Thank you for purchasing the OBH 15 phono
The function of the OBH 15 is to boost the level and correct the frequency response of a low level signal coming from a phono pick- up on a conventional turntable.
The signal required by most modern amplifiers is described as being 'LINE' level, which is, in technical terms, between 200 and 500 milli Volts with a flat frequency response.
Unless your amplifier has a specific 'Phono' or Disc input, the level will be too low and the frequency response will be wrong. The OBH 15 is designed to boost the signal and introduce an R.I.A.A. frequency response characteristic.
