Creek Audio OBH 21 dimensions Specification, Warranty, Creek Audio Limited

SPECIFICATION

STANDARD

OUTPUT POWER	> 10 mW into 30Ωto 300Ωloads
HEADPHONE IMPEDANCE	30Ωto 300Ω
THD	< 0.01% at 1 kHz
SIGNAL TO NOISE RATIO	> 70 dB
POWER CONSUMPTION	< 4VA
POWER SUPPLY	24V DC 150 mA
DIMENSIONS	180 x 100 x 66mm (7.4 x 4 x 2.6 “)
WEIGHT	570 gms (20 ozs)
SPECIAL EDITION
OUTPUT POWER	> 10 mW into 30Ωto 300Ωloads
HEADPHONE IMPEDANCE	30Ωto 300Ω
THD	< 0.005% at 1 kHz
SIGNAL TO NOISE RATIO	> 70 dB
POWER CONSUMPTION	< 6VA
POWER SUPPLY	24V DC 250 mA
DIMENSIONS	180 x 100 x 66mm (7.4 x 4 x 2.6 “)
WEIGHT	570 gms (20 ozs)

WARRANTY

If within two years of the purchase date your OBH product proves to be defective for any reason other than accident, misuse, neglect, unauthorised modification or fair wear and tear, Creek Audio Ltd will, at its discretion, replace the faulty parts without charge for labour or return carriage within the U.K.This warranty is valid only within the U.K. and given in addition to statutory rights. Service enquiries outside the U.K. should be addressed first to the supplying dealer and or Creek distributor/importer. Warranties granted in these countries are entirely at the discretion of the distributor.

Creek Audio Limited

12 Avebury Ct, Mark Road, Hemel Hempstead HP2 7TA England

Telephone: +44 (0) 1442 260146 Fax: +44 (0) 870 622 0846

E-mail: info@creekaudio.com Web: www.creekaudio.com

Creek OBH 21/21SE

Headphone Amplifier

Operating

Instructions

Thank you for purchasing the OBH 21/21SE headphone amplifier. You are now in possession of a state-of-the-art product. The functions and operation of the OBH 21/21SE are extremely simple. The following notes are provided to explain all aspects of its design and use.

The OBH 21 is a miniature audio amplifier, designed specifically to drive two pairs of low to medium impedance (30Ωto 300Ω) headphones from a line level source. The OBH 21SE is a high end version using more expensive components. It is more efficient to have a small amp do this rather than waste the power of a full size one when only driving headphones.

The OBH 21 and 21SE are compatible with any source at line level. For example the average output level of a CD player can be connected directly to the input of the OBH 21/21SE just as it could also be used in conjunction with a stand-alone pre-amplifier or integrated amplifier which doesn’t have a headphone socket.