Creek Audio Wyndsor Sw Software Version, Technical Specification, Warranty, Phono Pre-Amplifier

Wyndsor

PHONO PRE-AMPLIFIER

SW (SOFTWARE) VERSION

This displays the current version of the software in the device. Updates, as they become available, can be installed via a replaceable electronic chip inside the case. Press any button to go back to the main menu.

A DIN plug is provided to enable the correct cable to be produced for balanced input connection. The wiring configuration is noted on the rear panel. Please consult your dealer if in any doubt. Additional information can be accessed from the FAQ section of the Creek Audio website.

TECHNICAL SPECIFICATION
Gain 5 steps in dBs	40, 45, 53, 61, 70
Distortion	< 0.005 @ 1kHz
Frequency Response	0.5 Hz – 100 kHz (+/- 0.5dB)
IEC roll-off (7950us)	-3dB @ 20 Hz -6dB @ 10Hz
Noise in dBs in 5 gain settings	-92, -81, -79, -72, -62.5
Separation	< 93dB
DC Offset	< +/- 10mV
Input Capacitance	100pF, 440pF, 1.1nF, 1.4nF
Input Resistance	91R, 100R, 1k, 33k, 47k
Wyndsor Power Supply Unit	2 toroidal mains transformers and low noise regulators
Switchable Mains Voltage Selector	115/230V AC External
	Specification subject to change without notice

WARRANTY

If within two years of the purchase date your Wyndsor phono pre-amplifier product proves to be defective for any reason other than accident, misuse, neglect, unauthorised modification or fair wear and tear, Creek Audio Ltd will, at its discretion, replace the faulty parts without charge for labour or return carriage within the U.K. This warranty is valid only within the U.K. and given in addition to statutory rights. Service enquiries outside the U.K. should be addressed first to the supplying dealer and or Creek distributor/importer. Warranties granted in these countries are entirely at the discretion of the distributor.

Creek Audio Limited

12 Avebury Ct, Mark Road, Hemel Hempstead HP2 7TA England

Telephone: +44 (0) 1442 260146 Fax: +44 (0) 870 622 0846

E-mail: info@creekaudio.com Web: www.creekaudio.com

E&OE