Cres Cor RO151FPWUA18B manual Installation Instructions, HOW to Install Cabinets, LOW Water Light

5925 Heisley Road • Mentor, OH 44060-1833 877/CRES COR (273-7267) • 440/350-1100 Fax: 440/350-7267 • www.crescor.com

Ovens Humidity with	FL-2267
Microprocessor Controls
Rev. 8 (1/05)	Page 3 of 13

INSTALLATION INSTRUCTIONS

VENTING YOUR OVEN:

1.The purpose of ventilating hoods is to direct and capture smoke, grease-laden vapors, heat, odors, or fumes.

2.Low temperature equipment (maximum temperature 250°F/121°C) does not produce heat, odors, fumes, grease-laden vapors or smoke and is not required to be vented.

3.Most jurisdictions consider our low-temperature ovens (maximum temperature is 350°F/177°C) as low-heat appliances not requiring vent hoods.

4.Installation must conform with local codes. The authority having jurisdiction of enforcement of the codes will have the responsibility for making interpretations of the rules.

UNIT SPECIFICATIONS: All units use three (3) elements (2670 watts each).

All units are rated 8200 watts. Water units have one (1) immersion element (1850 watts).

CONVECTION OVENS	ELECTRICAL SPECS			ELEC. LOAD		POWER SUPPLY REQUIREMENT
	(AC SERVICE)
CMP MODEL NOS.
	Volts	Ph	Hz.	Amps	Volts	Amps	Ph	Wire	Volts	NEMA
CO151FWUA12B2081Q1	208	1	60	39	208	50	1	3	208	6-50P
CO151FWUA12B2401Q1	240	1	60	34	240	50	1	3	240	6-50P
CO151FWUA12B2083Q1	208	3	60	23	208	30	3	4	208	L15-30P
CO151FWUA12B2403Q1	240	3	60	20	240	30	3	4	240	L15-30P
RETHERM OVENS
RO151FWUA18B2081Q1	208	1	60	39	208	50	1	3	208	6-50P
RO151FWUA18B2401Q1	240	1	60	34	240	50	1	3	240	6-50P
RO151FWUA18B2083Q1	208	3	60	23	208	30	3	4	208	L15-30P
RO151FWUA18B2403Q1	240	3	60	20	240	30	3	4	240	L15-30P
RO151FW1332B2081Q1	208	1	60	39	208	50	1	3	208	6-50P
RO151FW1332B2401Q1	240	1	60	34	240	50	1	3	240	6-50P
RO151FW1332B2083Q1	208	3	60	23	208	30	3	4	208	L15-30P
RO151FW1332B2403Q1	240	3	60	20	240	30	3	4	240	L15-30P
HALF-SIZE OVENS ARE	RATED	AT 4950 WATTS (THREE [3] HEATERS AT 1470 WATTS EACH)
CO151HWUA6B2081Q1	208	1	60	24	208	30	1	3	208	6-30P
CO151HWUA6B2401Q1	240	1	60	21	240	30	1	3	240	6-30P
CO151HWUA6B2083Q1	208	3	60	15	208	20	3	4	208	L15-20P
CO151HWUA6B2403Q1	240	3	60	13	240	20	3	4	240	L15-20P
CO151XWUA5B2081Q1	208	1	60	24	208	30	1	3	208	6-30P
CO151XWUA5B2401Q1	240	1	60	21	240	30	1	3	240	6-30P
CO151XWUA5B2083Q1	208	3	60	15	208	20	3	4	208	L15-20P
CO151XWUA5B2403Q1	240	3	60	13	240	20	3	4	240	L15-20P

All models are designed for AC Service. Model numbers may have the letters: L, M, 2M, or S.

HOW TO INSTALL CABINETS:

1.Remove all packing material from inside and outside of cabinet.

2.Position cabinet on level floor; install the cabinet interior (pan slides) if not already installed.

3.Plug power cord into proper wall receptacle.

4.Fill water pan with three (3) gallons of HOT water (see CAUTION).

LOW WATER LIGHT:

When water needs to be added to the pan, the Low Water Light will stay on until the pan is refilled.

Use of treated water is recommended for proper operation and

to maintain warranty. It will reduce scaling.