Cres Cor RO151FW1332B manual Maintenance Instructions, TROUBLE-SHOOTING Guide, HOT Unit Removal

5925 Heisley Road • Mentor, OH 44060-1833 877/CRES COR (273-7267) • 440/350-1100 Fax: 440/350-7267 • www.crescor.com

Ovens Humidity with	FL-2267
Microprocessor Controls
Rev. 8 (1/05)	Page 9 of 13

MAINTENANCE INSTRUCTIONS

TROUBLE-SHOOTING GUIDE, continued

HOW TO ADJUST THE DOOR LATCH:

1.For vertical (up and down movement) adjustment:

a.Loosen (2) screws located in magnetic strike.

b.Move strike up or down for alignment to magnet on latch.

c.Tighten screws to secure

2.For horizontal (greater or lesser magnetic draw) adjustment:

a.Loosen (4) screws in door latch.

b.Move latch forward or backward to adjust magnetism.

c.Tighten screws to secure.

HOT UNIT REMOVAL:

1. Disconnect power cord from wall outlet.

2. For half-size model: CO151HW Series, remove screws around top cover.

3. Disconnect the yellow cord between top and bottom, in the back of the cabinet (see Figure 2).

4. Lift off Hot Unit.

FIGURE 2

Hot Unit Removal

REPLACEMENT PARTS: Include all information on nameplate when ordering parts.

Cabinet Replacement Parts

MODEL PRFIX CO-151, RO-151 (“Q” SERIES)

DESCRIPTION	-FPWUA (12), (18)	-FWUA (12), (18)	-FW1332	-HWUA6	-XWUA5
Hot Unit, 208V, 1 Ph	HU675013Q1	HU675025Q1	HU675029Q1	HU675037Q1	HU675037Q1
Hot Unit, 208V, 3 Ph	HU675015Q1	HU675027Q1	HU675031Q1	HU675039Q1	HU675039Q1
Hot Unit, 240V, 1 Ph	HU675014Q1	HU675026Q1	HU675030Q1	HU675038Q1	HU675038Q1
Hot Unit 240V, 3 Ph	HU675016Q1	HU675028Q1	HU675032Q1	HU675040Q1	HU675040Q1
Door Latch Kit	1006-120-001	1006-120-01	1006-120-001	1006-120-01	1006-120-01
Door Strike	1006-120-02	1006-120-02	1006-120-02	1006-120-02	1006-120-02
Door Hinge	0519-074	0519-074	0519-074	0519-074	0519-074
Door Assembly	1221-525	1221-525	1221-543	1221-525	1221-545
Door Gasket	0861-185	0861-185	0861-184	0861-185	0861-250
Angles or Racks	0621-281-SS	0621-281-SS	1104-108	0621-281-SS	0621-281-SS