Crest Audio CPX 3800 owner manual Connecting inputs, Connecting outputs

2installation

CPXTM owner’s manual

connecting inputs

Input connections are made via the three-pin XLR (pin 2+) or 6.3 mm plug “Combi” connectors on the rear panel of the amplifier.The inputs are actively balanced. The input overload point is high enough to accept the maximum output level of virtually any signal source.

inputs

outputs

connecting outputs

All models have two output (speaker) connections per channel. Cables can be connected with banana plugs, spade lugs or bare wire to the five-way binding posts.The preferred method is connection via the Speakon® connectors.

Output terminals are hazardous live and the external wiring connected to these terminals requires installation by an instructed person or the use of ready- made leads or cords.

p. 14