Appendix B - General Amplifier Specifications (Model 10004)
| 1kHz, <0.02% THD+N | ||
8Ω Stereo Power (x4 ch.) | 750W |
| 720W |
|
|
|
|
4Ω Stereo Power (x4 ch.) | 1225W |
| 1200W |
|
|
|
|
8Ω Bridged Mono Power (x2 ch.) | 2450W |
| 2400W |
2Ω Stereo Power (x4 ch.) | 1400W |
| 1400W |
4Ω Bridged Mono Power (x2 ch.) | 2800W |
| 2800W |
|
|
|
|
Max RMS Output Voltage (each channel) | 91V |
|
|
Peak Output Voltage (each channel) | 137V |
|
|
|
|
| |
Frequency Response (+0 / | 20 |
| |
Power Bandwidth (rated power at 4Ω , 1% THD+N) | 20 |
| |
Protection Circuitry | Clip Limit, IGM, AutoRamp, High Temp, | ||
| DC voltage, | ||
THD+N (rated power at 4Ω , 1kHz) | <0.02% |
| |
SMPTE IMD (rated power at 8Ω , 60Hz & 7kHz) | 0.06% |
|
|
Damping Factor | 600:1 |
|
|
Input CMRR (1kHz) | >60 dB |
|
|
|
|
| |
Input Sensitivity (rated power at 4Ω ) | 1.7V RMS |
| |
Voltage Gain | X40 |
|
|
Input Impedance (balanced) | >20kΩ |
|
|
|
|
| |
Hum and Noise (“A” weighted, full power, 4Ω ) | > |
| |
Crosstalk (“A” weighted, full power, 4Ω ) | > |
| |
Class | H |
|
|
|
| ||
Input Connectors (per channel) | Female XLR (pin 3+), Octal Socket | ||
|
|
| |
Output Connectors (per channel) |
| ||
|
|
| |
Filter Storage | 168,000 µF per channel |
| |
|
|
| |
Power Supply (factory configured) |
| ||
Idle Current Draw (120V) | 1.6A per line cord |
| |
|
|
|
|
1/8 Power Curr. Draw (typical music, 120V/4Ω ) | 10.8A | per line cord |
|
1/3 Power Curr. Draw (continuous music, 120V/4Ω ) | 21.8A | per line cord |
|
Max Curr. Draw (circuit breaker rating, 120V/4Ω ) | 35.6A | per line cord |
|
|
|
| |
Thermal Emissions (1/8 Power, 4Ω ) | 3380 BTU/hr |
| |
|
|
| |
Thermal Emissions (1/3 Power, 4Ω ) | 6140 BTU/hr |
| |
|
| ||
Cooling | Rear to front tunnel, 2 speed DC fan, 235 CFM max | ||
|
| ||
Controls | Front panel: 4 attenuators, 2 circuit breaker /power switches; | ||
| Rear panel: 2 mode switches, signal ground lift jumper | ||
LED Indicators (per channel) | Clip/Limit, Signal, Temp/DC, Active | ||
|
| ||
Construction | 12 ga. steel chassis, .093" (2.5mm) aluminum front panel | ||
Dimensions (Height x Width x Depth) | 7" x 19" x 20.5" (19.5" to end of rear ears); | ||
| 178mm x 483mm x 521mm (496mm to back of rear ears) | ||
Gross Weight, Net Weight | 145 lbs (65.83 kg.), 137 lbs (62.20 kg.) | ||
Warranty | 5 years, parts and labor† |
| |
†USA, Canada, U.K., and many other countries. Power figures are watts per channel, both channels driven. Crest Audio reserves the right to make improvements in manufacturing or design which may affect specifications. Crest Audio specification literature is avail- able in downloadable PDF file format; visit our website at http://www.crestaudio.com. ©1997 Crest Audio Inc. 12/15/97
Appendix B | Crest Audio Pro Series Power Amplifiers |
