Interface for Apple® iPod® Crestron CEN-IDOC Hardware Hookup Ventilation To prevent overheating, do not operate this product in an area that exceeds the
environmental temperature range listed in the table of specifications. Consideration
must be given if installed in a closed or multi-unit rack assembly since the operating
ambient temperature of the rack environment may be greater than the room ambient.
Contact with thermal insulating materials should be avoided on all sides of the unit.
Connecting the CEN-IDOC Make the necessary connections as called out in the illustration that follows this
paragraph. Apply power after all connections have been made.
When making connections to the CEN-IDOC, consider the following:
• Use Crestron power supplies for Crestron equipment.
• The CEN-IDOC-DS is the only docking station that can be used with the
CEN-IDOC.
• The included 8 foot (2.44 meter) cable cannot be extended.
Hardware Connections for the CEN-IDOC (Front)
PWR:
FROM POWER PACK
(12VDC, 1.5A)
LAN:
10/100 BASE-T
ETHERNET TO LAN
AUDIO (CAT5):
CARRIES BALANCED
AUDIO
AUDIO OUT (RCA):
CARRIES UNBALANCED
AUDIO
COMPUTER:
TO PC
Hardware Connections for the CEN-IDOC (Rear)
TO DOCKING STATION:
CONNECT TO iPod OR
CEN-IDOC-DS WITH
INCLUDED CABLE GROUND
8 Interface for Apple iPod: CEN-IDOC Operations Guide – DOC. 6404A