Crestron electronic CEN-IDOC Crestron CEN-IDOC Interface for Apple iPod , Programs and Firmware

Crestron CEN-IDOC Interface for Apple® iPod®

• Display the “System Info” window (click the icon) and select the

CEN-IDOC entry.

• Use the Crestron Toolbox to create the CEN-IDOC IP table.

Select Functions | IP Table Setup. ⇒

⇒

Either add, modify, or delete entries in the IP table. The CEN-

IDOC can have only one IP table entry.

A defined IP table can be saved to a file or sent to the device.

• Edit the control system ‘s IP table to include an entry for the CEN-IDOC.

The entry should list the CEN-IDOC’s IP ID (specified on the CEN-IDOC’s

IP table) and the internal gateway IP address 127.0.0.1.

Programs and Firmware

• Display the network device tree (Tools | Network Device Tree) to show all

network devices connected to the control system. Right-click on the

CEN-IDOC to display actions that can be performed on the CEN-IDOC:

Upgrade firmware

Change Net ID

• Upload the SIMPL Windows file to the control system using SIMPL

Windows or Crestron Toolbox.

• Upgrade CEN-IDOC firmware via Crestron Toolbox.

Establish serial or TCP/IP communications with the CEN-IDOC

and display the “System Info” window.

Select Functions | Firmware… to upgrade the CEN-IDOC

firmware.

For details on uploading and upgrading, refer to the SIMPL Windows help file or the

Crestron Toolbox help file.

Operations Guide – DOC. 6404A Interface for Apple iPod: CEN-IDOC • 15