Crestron electronic Ethernet eServer Indicators

Crestron eServer™ Ethernet OEM Module

eServer Indicators

There are eight LED indicators located on the top panel of the eServer. Each has a

silk-screened label. Refer to the illustration below and the descriptions that follow.

eServer Indicators

ETHERNETDEVICE

ETHERNETDEVICE

PWR (Power)

This LED illuminates when 12 volts (from the external power pack) is supplied to

the eServer.

RXD (Ethernet)

This LED illuminates when the Ethernet port on the eServer receives Ethernet data.

TXD (Ethernet)

This LED illuminates when the Ethernet port on the eServer transmits Ethernet data.

LNK (Ethernet)

This LED illuminates when there are attachments to the Ethernet port on the eServer.

ERR (Ethernet)

This LED illuminates when any error is detected. It flashes when permanent ROM is

reprogrammed.

RXD (Device)

This LED illuminates when the eServer receives data on the DEVICE port.

TXD (Device)

This LED illuminates when the eServer transmits data on the DEVICE port.

PASS (Device)

This LED illuminates when the pass-through mode is enabled on the DEVICE port

of the eServer.

Operations Guide - DOC. 8148 Ethernet OEM Module: eServer™ • 5

Contents

Main Page Demo Already Installed! Quick Start 1. Install Crestron Viewport Software 2. Connect eServer 3. Assign IP Address Contents Crestron eServer Ethernet OEM Module Ethernet OEM Module: eServer Description Functional Description Ethernet OEM Module Crestron eServer Physical Description eServer Ports COM IN12V DC .5A DEVICE ETHERNET CRESTRON POWER PACK INPUT SPECS OUTPUT SPECS Page eServer Indicators ETHERNETDEVICE Ethernet OEM Module Crestron eServer Leading Specifications Control & Configuration Choose the Interface Method Crestron eServer Ethernet OEM Module Crestron Control Non-Crestron Control Choose the Configuration Implement the Chosen Configuration 2. Crestron Control System Control of a Device Through the eServer Page 4. Custom Application Control of a Device Through the eServer Utilizing Crestron ActiveCNX Control 5. Custom Application Control of a Device Through the eServer Utilizing Standard TCP/IP Sockets Setup Menus Page Page Add_master ip_adr ip_mask def_router ping port Page COMMAND DESCRIPTION reboot system prepare cancel version password options Ethernet OEM Module Crestron eServer Programming with SIMPL Windows CEN-OEM Symbol SIMPL+ Interface Example Program Page Renumbering the Example Program Page Web Page Demos Page Problem Solving Ethernet OEM Module Crestron eServer TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Further Inquiries Software License Agreement LICENSE TERMS OTHER LIMITATIONS PROPRIETARY RIGHTS GOVERNING LAW CRESTRON LIMITED WARRANTY Crestron eServer Ethernet OEM Module Return and Warranty Policies Merchandise Returns / Repair Service CRESTRON Limited Warranty Appendix A: IP Table Setup Appendix B: Uploading Web Pages Page Appendix C: Uploading a SIMPL+ Program Glossary of Terms Crestron eServer Ethernet OEM Module IP Address IP ID IP Mask IP Table Page Crestron eServer Ethernet OEM Module URL Web Page Website