Crestron electronic MT-1000C Setup

3.8 Inch RF Remote Crestron MT-1000C

NOTE: For detailed programming information, refer to the latest version of the

MT-1000C Programming Guide (Doc. 6330), which is available from the

Crestron website.

MT-1000C Docking Station Indicators and Port

The MT-1000C has two indicators and one port on the docking station.

• POWER Indicator – Red LED indicates power is applied to docking

station input.

• STATUS Indicator – Red LED indicates charging, blue LED indicates

fully charged.

• Power Input Port – Connects the power supply to docking station.

Docking Station Top and Rear Views

Setup

Battery Installation and Replacement

1. Unlock the rear battery cover by rotating the locking screw clockwise.

2. Lift out the battery and disconnect the plug from the battery connector.

3. Connect the new battery. The connector is keyed so that it will only insert

one way.

6 • 3.8 Inch RF Remote: MT-1000C Operations Guide - DOC. 6322

Contents

Main Page Crestron MT-1000C 3.8 Inch RF Remote Contents Page Crestron MT-1000C 3.8 Inch RF Remote 3.8 Inch RF Remote: MT-1000C Introduction Features and Functions 3.8 Inch RF Remote Crestron MT-1000C Specifications Specifications for the MT-1000C are given in the following table. 2 3.8 Inch RF Remote: MT-1000C Operations Guide - DOC. 6322 SPECIFICATION DETAILS Crestron MT-1000C 3.8 Inch RF Remote Physical Description Page MT-1000C Controls and Ports Programmable Buttons Non-Programmable Buttons USB Programming Port 3.8 Inch RF Remote Crestron MT-1000C MT-1000C Docking Station Indicators and Port Setup Battery Installation and Replacement Crestron MT-1000C 3.8 Inch RF Remote Docking Station Setup Page Backlight Bright Page Page 3.8 Inch RF Remote Crestron MT-1000C Calibration Factory Default Exit Industry Compliance Problem Solving 3.8 Inch RF Remote Crestron MT-1000C Further Inquiries Future Updates Crestron MT-1000C 3.8 Inch RF Remote Return and Warranty Policies Merchandise Returns / Repair Service CRESTRON Limited Warranty