3.8 Inch RF Remote Crestron MT-1000C Calibration
Calibrates the touchscreen. Use a stylus or pen top (not a finger) and follow the
directions on the screen.
Factory Default
Resets the memory to the factory condition.
WARNING: All programming will be lost. Do not use this button unless
directed to do so by technical support personnel.
Exit
The Exit button returns the MT-1000C to normal operation.
Industry Compliance As of the date of manufacture, the MT-1000C has been tested and found to
comply with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling.
NOTE: This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
12 • 3.8 Inch RF Remote: MT-1000C Operations Guide - DOC. 6322