Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer
Operations Guide - DOC. 6300 QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 • 57
“Send Program” Window
4. To verify that the program has been transferred successfully, select
Diagnostics | Report Program Information or press F7. This should
display a window that provides details about the current program loaded
into the control system.
Firmware Upgrade A firmware upgrade file has the
extension .upg. To take advantage of all the available features, it is important that the unit contains
the latest firmware available. Therefore, please check the Crestron website for the
latest version of firmware. Not every product has a firmware upgrade, but as Crestron
improves functions, adds new features, and extends the capabilities of its products,
firmware upgrades are posted. To upgrade the firmware, complete the following
steps.
1. Verify that the procedure for “Communication Settings” that begins on
page 54 has been performed.
2. As shown after this step, select File Transfer | Update Network
Device Firmware… from the Viewport menu bar.
File Transfer | Update Network Device Firmware… Command
3. As shown after this step, select the Net ID of the MD5x1 and then click
OK. The “Open” window appears (refer to the subsequent graphic).