Crestron ST-DS | Docking Station/Charger |
Charging the ST-BTP (Alone)
CONTACTS
ST-BTP
RECHARGABLE
POWER PACK
ST-DS
SHOWN WITH OPTIONAL
CHARGING GUIDE
Method 2: ST-BTP Installed in an Inactive Touchpanel
NOTE: Do not use the optional charging guide when charging the ST-BTP while installed in the touchpanel.
NOTE: This method only applies to certain Crestron wireless touchpanels.
In this method, the ST-BTP is properly installed into the touchpanel. Position the touchpanel into the ST-DS cavity, as shown on the next page. Be sure that the contacts of the ST-DS and ST-BTP touch. The CHG LED illuminates while the ST-BTP is charging. When the ST-BTP is fully charged, the CHG LED extinguishes and the RDY LED illuminates. As long as the touchpanel remains inactive (OFF), a fully discharged ST-BTP fully charges in two hours.
TouchPanel Properly Positioned (ST-1550C shown)
Operations Guide - DOC. 5738A | Docking Station/Charger: ST-DS ∙ 5 |
