ISYS® TILT TOUCHPANELS

Isys® Tilt Touchpanel Accessories

INTERFACE MODULES AND CABLES

QM-TXQuickMedia™ Transmitter

The QM-TX provides a low-cost multimedia interface solution for QuickMedia-based Touchpanels and MediaManager systems. Portable or rack-mounted, the QM-TX can be used to send audio, video, and computer signals to any QM-equipped touchpanel via Crestron’s exclusive single-wire QuickMedia transport.

Five BNC’s are provided on the QM-TX to accept composite, S-Video, component, HDTV, or RGB signals (up to 1600 x 1200 at 60 Hz). Balanced stereo line-level audio signals are transmitted simultaneously with 24-bit digital resolution. Video formats can be switched dynamically and automatically under system control. The QM-TX is 1/2-space rack-mountable using the optional ST-RMK kit.

SPECIFICATIONS

Video

Gain: 0dB (75 ohm termination)

Bandwidth: 100MHz (-3dB) at unity gain

Formats: Supports standard definition and HDTV up to 720p and 1080i

RGB

Gain: 0dB (75 ohm termination)

Maximum Resolution: 1600x1200 @ 60Hz (at unity gain) with cable length of 100 meters and maximum compensation at receiver (touchpanel)

Audio

A-D Conversion: Burr Brown 24-bit, 48 kHz

Frequency Response: 20Hz to 20kHz

Connectors

R/C/PR, G/Y/Y, B/COMP/PB, H, V: (5) BNC female RGB/Video input

Formats: RGBHV, RGBS, RGSB, YPBPR, S-Video (Y/C), composite;

Input Impedance: 75 ohms (R/C/PR, G/Y/Y, & B/COMP/PB)

Sync Impedance: 620 ohms (H and V)

Maximum Input Voltage: 0.7 VP-Pfor RGB and C of S-Video;

1 VP-Pfor composite and Y of S-Video; 5 VP-Pfor H and V Sync; Video signal sensing on Y, COMP, and H

AUDIO: (1) 5-pin 3.5mm detachable terminal block Balanced/unbalanced stereo line-level audio input Maximum Input Level: 4 VRMS balanced, 2 VRMS unbalanced Input Impedance: 10k ohms balanced, 5k ohms unbalanced

QM OUT: (1) 8-wire RJ45 female, QuickMedia output port Connects to QM input port of touchpanel of other QuickMedia device via CresCAT-QM or CresCAT-IM cable*

NET: (2) 4-pin 3.5mm detachable terminal blocks Cresnet slave ports, paralleled

Connect to Cresnet control network

G:(1) 6-32 screw, chassis ground lug

LED Indicators

PWR: (green) Indicates DC power supplied from Cresnet network

NET: (yellow) Indicates communication with Cresnet system

VIDEO ACT: (red) Indicates presence of a valid video input signal

SETUP (rear): (red) Used for touch-settable ID (TSID)

Controls

SETUP: (1) Button for touch-settable ID (TSID)

Power Requirements

Cresnet Power Usage: 5 Watts (0.21 Amp @ 24 Volts DC)

Environmental

Temperature: 41° to 104°F (5° to 40°C)

Humidity: 10% to 90% RH (non-condensing)

Enclosure

Black metal, 0.5U 19" rack mountable using optional ST-RMK (sold separately)

Dimensions

Height: 1.80 in (4.57 cm)

Width: 7.07 in (17.96 cm)

Depth: 7.02 in (17.83 cm)

Weight

2.05 lbs (0.93 kg)

AVAILABLE ACCESSORIES

ST-RMK

Rack Mount Kit

*For QuickMedia wiring use CresCAT-QM or CresCAT-IM cable; the maximum aggregate cable length and delay skew between any QM transmitter (origination point) and QM receiver (endpoint) is 450 ft (137 m) and 22 nS.

tilt touchpanels

www.crestron.com 800.237.2041 201.767.3400

© 2007 Specifications subject to change without notice

47

Page 47
Image 47
Crestron electronic TPS Series, TPS-17W, TPS-3000 manual QM-TXQuickMedia Transmitter, LED Indicators, Controls

TPS Series, TPS-3000, TPS-17W specifications

Crestron is a leader in advanced control and automation systems, renowned for its high-quality solutions. Among their noteworthy offerings is the TPS Series, highlighted by models such as the TPS-17W and TPS-3000. These touch panels are designed to provide seamless control of various systems, such as lighting, AV equipment, and environmental controls, making them crucial for modern smart spaces.

The TPS-17W boasts a 17-inch widescreen display, offering an expansive and user-friendly interface that accommodates a variety of applications. It features a high-resolution touchscreen, enabling users to interact effortlessly with diverse control functions. The panel is designed for intuitive navigation, enabling users to switch between functions, access menus, and control devices with a simple touch.

One of the main features of the TPS series is its customizable interface. Users can tailor the layout and design to fit their specific needs, allowing organizations to create a unique user experience that reflects their branding. This flexibility also extends to the programming capabilities of the panels, which can be easily integrated with Crestron's extensive ecosystem of devices and software.

The TPS-3000 is another standout in the series, offering similar features with some enhancements. It includes a larger touchscreen and advanced graphical capabilities, making it ideal for complex environments that require detailed monitoring and control. With its robust performance, the TPS-3000 can handle multiple simultaneous signals and commands, ensuring that operations run smoothly and efficiently.

Both TPS models utilize advanced technologies, including dynamic graphics, color displays, and responsive touch capabilities. They also support high-definition video and rich media content, allowing for more engaging presentations and user interactions.

Durability is a critical aspect of Crestron's design philosophy, and both the TPS-17W and TPS-3000 reflect this commitment. They are built with sturdy materials that endure high-frequency use, ensuring longevity in demanding environments like conference rooms, educational institutions, and commercial buildings.

Lastly, integration is made simple with Crestron’s programming tools and third-party interfaces, providing versatility to connect with a wide range of devices. Whether in a corporate boardroom, university lecture hall, or hospitality setting, the TPS series touch panels elevate the control experience, enabling users to effortlessly manage their environments with elegance and precision.