Crestron electronic TPS Series manual TPSBLOCK-10 10-Pin Connector Block for Isys Tilt Touchpanels

ISYS® TILT TOUCHPANELS

Isys® Tilt Touchpanel Accessories

tilt touchpanels

INTERFACE MODULES AND CABLES

TPSBLOCK-1010-Pin Connector Block for Isys® Tilt Touchpanels

The TPSBLOCK-10 provides a simplified connectivity solution for Isys TPS-3000 and TPS-4000 tilt touch- panels. This chassis-mount 10-pin RJ45 jack is suitable for installation on any custom panel, or in standard adapter plates offered from other manufacturers. An integral 10' cable is included, terminated at the other end with a 10-pin RJ45 male connector.

The TPSBLOCK-10 is compatible with Crestron TPS-IMPC and TPS-4500IMPC interface modules, allowing the installer to hide the interface module beneath a tabletop or inside a lectern while providing a convenient, clean-looking connection above surface for the touchpanel.

SPECIFICATIONS

Connectors

(1)10-pin RJ45 female, chassis-mount, shielded

(1)10-pin RJ45 male, shielded

Length

10 ft (3.05 m)

ST-PKProgramming Cable Kit

It is used only for loading touchpanel files, updating firmware, and configuring the touchpanel prior to operation. The ST-PK may also be used to update firmware and adjust the digital audio signal processing in Crestron’s 7.1 surround sound processors and room solution boxes.

SPECIFICATIONS

Cables

3.5mm to RJ11 Cable Assembly (CNSP-585): Provides connection between a SmarTouch wireless touchpanel and the control processor via a RJ11 Cresnet port; may require an additional CNRJ11 , ST-CNB, or C2N-HBLOCK accessory.

RJ11-to-RJ11 Cable plus RJ11-to-DB9F Adapter (STCP-502):

Provides connection between an Isys touchpanel, surround processor, or room solution box RS-232 port and PC COM port.

56

www.crestron.com 800.237.2041 201.767.3400

© 2007 Specifications subject to change without notice