ISYS® WALL MOUNT TOUCHPANELS

Isys® Wall Mount Touchpanels

Isys® 5" Wall Mount Touchpanel TPS-2000L

￿5" active matrix touchscreen display

￿Isys graphics engine 320 x 234 resolution

￿Synapse Image Rendering Algorithm

￿Integrated video with 2:1 virtual pan/zoom

￿Built-in amplified speakers and microphone

￿10 engravable hardbuttons Built-in light sensor

￿Cresnet communications

￿Stylish flush mount design

SPECIFICATIONS

Touchscreen Display

Display Type: TFT Active matrix color LCD

Size: 5 inch (12.7 cm) diagonal

Resolution: 320 x 234 pixels

Color Depth: 16-bit, 64k colors

Illumination: Edgelit fluorescent

Viewing Angle: ±65° horizontal, +40°/-65° vertical (invertible)

Touchscreen: Resistive membrane

TPS-2000L using conventional AV sources

Buttons

(10) Replaceable engravable buttons, programmable

Light Sensor

Programmable photosensor for automatic backlight dimming

Processor

CPU: 32-bit Freescale ColdFire® Microprocessor

Memory

DRAM: 8 MB

Flash: 2 MB

Maximum Project Size: 1.5 MB

Graphic Engine

Isys engine, 16-bit non-palette graphics; 65,536 colors; Synapse image rendering algorithm; multi-mode objects, color key video windowing

Video

Signal Types: Composite

Formats: NTSC 480i or PAL 576i

Color Depth: 16-bit; 65,536 colors

Features: Single-window scalable to full-screen, time base correction, gamma correction, 2:1 virtual pan/zoom

Audio

Hardware Features: Built-in microphone with defeatable AGC, built-in amplified speakers, internal volume control and audio mixer Audio Feedback (WAV): 8-bit PCM, mono, 8 kHz sampling rate, ~3 minutes capacity

Amplification: 2 Watts for built-in speakers (mono)

Connectors

NET: (1) 4-pin 3.5mm detachable terminal block

Connects to Cresnet control network

AUDIO/VIDEO: (1) 8-pin 3.5mm detachable terminal block; Comprises:

MIC OUT: (1) Balanced/unbalanced mono line-level output

Output Impedance: 600 ohms balanced, 300 ohms unbalanced

Maximum Output Level: 2 VRMS balanced, 1 VRMS unbalanced

AUDIO IN: (1) Balanced/unbalanced mono line-level input

Input Impedance: 20k ohms balanced, 10k ohms unbalanced

Maximum Input Level: 4 VRMS balanced, 2 VRMS unbalanced

VIDEO IN: (1) Composite video input, balanced

Input Impedance: 100 ohms (compatible with 75 ohm coaxial)

Input Level: 1 VP-P

Connects to any Crestron CAT5 balanced or coaxial video source

wall mount touchpanels

> continued

www.crestron.com 800.237.2041 201.767.3400

© 2007 Specifications subject to change without notice

81

Page 23
Image 23
Crestron electronic TPS-12L, TPS-4000L, TPS-3100L, TPS-17L, TPS-15L manual Isys 5 Wall Mount Touchpanel TPS-2000L