Crestron electronic TPS-3100L TPMC-CH-IMW CAT5 Balanced AV Interface Wall Plate, Specifications

ISYS® WALL MOUNT TOUCHPANELS

Wall Mount Touchpanel Accessories

INTERFACE MODULES AND CABLES

TPMC-CH-IMWCAT5 Balanced AV Interface Wall Plate

wall mount touchpanels

114

The TPMC-CH-IMW is a wall plate version of the TPMC-CH-IMC interface module, providing a wall plate connection for new Isys® TPS and TPMC-CH series touchpanels that utilize Crestron Home® (CH) CAT5 Balanced AV connectivity*. It mounts into a 2-gang electrical box and includes front panel connections for a single “triamese” cable (provided with the touchpanel or sold separately). Several TPMC-CH-IMW wall plates may be installed to facilitate connectivity for a single movable touchpanel at multiple locations.

Wired as part of a complete Crestron Home CAT5 AV distribution system, the TPMC-CH-IMW requires just a single CresCAT-D cable, carrying Cresnet, bidirectional audio, and (1) video signal

up to 500 feet within a single bundled cable (observe distance limitations based upon power consumption for the touchpanel in use). The TPMC-CH-IMW can also be connected to conventional audio and coaxial video sources.

SPECIFICATIONS

Connectors – Front Panel

NET: (1) 4-pin 3.5mm detachable terminal block, pass-thru from rear NET port

AUDIO: (1) 8-pin RJ45 female

Bidirectional CAT5 balanced stereo audio port Output Impedance: 100 ohms balanced Maximum Output Level: 2 VRMS

Input Impedance: Infinite (unbuffered pass-thru to rear AUDIO OUT port)

VIDEO: (1) 8-pin RJ45 female

CAT5 balanced video output port

Output Impedance: 100 ohms balanced

Connectors – Rear Panel

NET: (1) 4-pin 5mm detachable terminal block;

Cresnet slave port, connects to Cresnet control network

VIDEO COMP/Y/Y, C/Pb, Pr: (1) 9-pin 3.5mm detachable terminal block;

Provides (1) composite, S-Video, or component video input Input Impedance: 100 ohms balanced (also accepts 75 ohm unbalance);

Input Level: 1 VP-Pnominal, 1.5 VP-Pmaximum

Maximum DC Offset: 1.5 Volts

Connects to any Crestron CAT5 Video Out port via CresCAT cable, or a conventional coax video source

AUDIO IN: (1) 5-pin 3.5mm detachable terminal block Balanced/unbalanced stereo line-level input

Input Impedance: 20k ohm balanced, 10k ohm unbalanced

Maximum Input Level: 4 VRMS balanced, 2 VRMS unbalanced Connects to any Crestron CAT5 Audio port via CresCAT cable, or a conventional audio source

AUDIO OUT: (1) 5-pin 3.5mm detachable terminal block Balanced stereo line-level output (unbuffered pass-thru from front AUDIO port);

Connects to any Crestron CAT5 Audio port via CresCAT cable, or a conventional balanced audio input

LED Indicators

PWR: (green) Indicates 24 Volts DC power supplied from Cresnet control network

Power Requirements

Cresnet Power Usage: 2 Watts

(0.08 Amps @ 24 Volts DC)

Environmental

Temperature: 41° to 122°F (5° to 50°C)

Humidity: 10% to 90% RH (non-condensing)

Enclosure

2-gang mountable in a standard electrical box (2.5 inch deep minimum); includes black metal front panel Decora® inserts; requires Decora faceplate (provided by others)

Dimensions

Height: 4.11 in (10.44 cm)

Width: 3.50 in (8.89 cm)

Depth: 1.66 in (4.22 cm)

Weight

7.5 oz (0.21 kg)

*The TPMC-CH-IMW is not compatible with QuickMedia or 10-pin

RJ45 based systems.

www.crestron.com 800.237.2041 201.767.3400

© 2007 Specifications subject to change without notice