REMOTE TRANSMITTER PROGRAMMING
1.Turn Ignition ON.
2.Press the Program/Override Button 4 times. After a few second delay, the unit will chirp and flash the lights 4 times.
3.Press button 1 on the remote control you wish to learn. You should get 2 light flashes indicating the unit is waiting for a 2nd code, then press button #1 of a second transmitter or transceiver, the unit will chirp and flash the lights 3 times indicating its waiting for the 3rd code and 4 times for 4th code. If all 4 codes are learned, the unit will automatically exit
Note 1: All transmitter codes must be learned at the time of programming. Any transmitters not present will be dropped from system memory. This system will learn a total of 4 transmitters max.
DIAGRAM:
TURN IGN ON
IGN
OFF
PRESS PROGRAM 4 TIMES
OFF
FLASH 2, 3, or 4 X's
PRESS BUTTON #1
ON EACH REMOTE
WAIT FOR 4 FLASHES
IGN
7
