OPERATING INSTRUCTIONS
6 BUTTON REMOTE TRANSMITTER:
BANK #1 (Directly Press Buttons)
Button 1: Arm
Button 2: Disarm
Button 3: Aux #1 (Trunk)
Button 4: Panic
Button 5: (Change to BANK #2)
BANK #2* (Press Bank #2 button FIRST, then within 3 seconds Buttons
Button 1: Silent Arm (No Chirp)
Button 2: Silent Disarm (No Chirp)
Button 3: Car Locator (5 light flashes, 1 siren chirp
Button 4: Aux #2
ACTIVE ARMING
| #2 |
| UNLOCK |
#1 |
|
LOCK | FLASHLIGHT |
#3 | BANK #2 |
PANIC | |
TRUNK | #4 |
(AUX.) | |
| PANIC |
* Remote LED Blinks 3 seconds for Bank #2.
To arm the alarm and lock the doors, press the #1 (Lock Symbol) button on the transmitter. You will hear a single siren chirp and the lights will flash once. The system will arm, the doors will lock and the starter will be disabled if these optional features are installed. The red LED in the vehicle will start flashing after 5 seconds. After a short delay to allow vehicle and electronics to stabilize the system will be completely armed.
ALARM TRIGGERING
If there is an intrusion into the vehicle or hard impact to the body will sound the alarm and flash the lights for 45 seconds. After 45 seconds the system will automatically shut off and
DISARMING
Press the #2 (Unlock) button on the transmitter to disarm the alarm. You will hear 2 siren chirps and the lights will flash twice. The LED stops flashing. Door will unlock and dome light will turn on if the options are installed. If you are using the Optional Driver’s priority unlock, then the first press of the unlock button will unlock the driver’s door only and the second press will unlock the passenger door or doors.
14
