OPERATING INSTRUCTIONS

ACTIVE RE-ARMING (FAIL-SAFE PROTECTION)

Active Re-arming means that the system will re-arm itself 30 seconds after disarmed with the transmitter if a door has not yet been opened. This is handy if the vehicle is accidentally disarmed (via the transmitter in your pocket) without you knowing it. This feature can also be turned off in programming option (6). Active rearm feature is disabled if you also have dome light illumination installed.

2nd AUX. OUTPUT (REMOTE AUX. OUTPUT 2)

To activate the Second auxiliary output press the Bank#2 Button on the side of the remote first, then Press Button #4 (Panic) to activate AUX. channel #2.

ARM/DISARM WITH IGNITION ON (PROGRAM OPTION #15)

This feature allows the system to be armed or disarmed while the ignition is in the ON position or vehicle is running. The feature is disabled by default and should not be used under normal operating conditions. On an installation with an add-on remote start module, this option can be enabled to allow the system to be armed or disarmed when the vehicle has been remote started (Ignition will be ON). Note that you cannot use this feature if you are also using the Full-time carjack protection. If you add a remote start and the Ignition turns on, a Carjack trigger will be activated.

CARJACK PROTECTION FEATURES

ACTIVE CARJACK

This feature provides Active Carjack protection and must be enabled before use through Alarm programming option (14) See page 10. When the Ignition is on (vehicle is running), press button #4 (Panic). Parking lights will flash TWICE to confirm the Carjack countdown sequence. LED begins to flash slowly. 90 Seconds later, the unit will begin a Carjack Cycle consisting of 20 seconds of pre-warning chirps turning into a full system activation with siren/flashing light pulses for 5 min. To reset Active Carjack, IGNITION MUST BE ON, then press Button #2. Siren/Horn chirp, LED goes OFF, carjack is reset.

PASSIVE CARJACK

This feature provides Passive Carjack protection and must be enabled before use through Alarm programming options (13) & (14). See page 10. We recommend this mode should only be used in serious situations. When the Ignition is on (vehicle is running), and a door is opened and closed, the Carjack countdown sequence will be initiated (lights flash twice & LED begins to flash). 90 Seconds later, the unit will begin a Carjack Cycle consisting of 20 seconds of pre-warning chirps turning into a full system activation with siren/flashing light pulses for 5 min. To reset Passive Carjack, Ignition must be ON, doors must be closed, then press the override/program button (3) times. Siren chirps once, LED goes out, carjack is reset. NOTE: Active carjack can still be used when the Passive Type carjack is activated.

17

Page 17
Image 17
Crimestopper Security Products CS-2002DPII manual Carjack Protection Features, Active RE-ARMING FAIL-SAFE Protection

CS-2002DPII specifications

The Crimestopper Security Products CS-2002DPII is a sophisticated and versatile vehicle security system designed to provide reliable protection for car owners. This advanced system combines a range of features and technologies to deter theft and provide peace of mind for users.

One of the standout features of the CS-2002DPII is its two-way paging system, which allows users to communicate with their vehicle remotely. This two-way communication ensures that the owner receives instant notifications if their vehicle is tampered with, as well as confirmation when commands are successfully executed. The remote control can transmit signals up to a staggering 1,500 feet, providing excellent range and allowing users to monitor their vehicle from a significant distance.

The CS-2002DPII incorporates multiple security sensors, including shock and tilt sensors. The shock sensor detects vibrations or impacts, triggering an alarm if unauthorized activity is detected. The tilt sensor monitors the angle of the vehicle, alerting the owner if an attempt is made to tow or jack up the car. This dual-layered approach effectively reduces the likelihood of theft by ensuring that even subtle movements or disturbances trigger a response.

Another notable characteristic of the Crimestopper CS-2002DPII is its built-in immobilizer feature. This technology prevents the engine from starting unless the correct sequence of commands is provided via the remote. This added level of security significantly decreases the chances of a successful theft, as a would-be thief cannot easily bypass this safeguard.

The CS-2002DPII also supports additional features such as keyless entry and programmable features, allowing users to customize their security experience to meet their individual needs. The system is designed to be user-friendly, with intuitive programming and operation, ensuring that car owners can easily manage their vehicle’s security settings.

Furthermore, the construction of the CS-2002DPII is durable, designed to withstand various environmental conditions and offer long-lasting performance. With an emphasis on reliability, the system is engineered to provide optimum security without frequent maintenance interruptions.

In conclusion, the Crimestopper Security Products CS-2002DPII stands out as a top-tier vehicle security solution that merges advanced technology, user-friendly features, and robust construction. Its two-way communication, comprehensive sensors, and engine immobilization make it a formidable deterrent against theft, ensuring that car owners can enjoy peace of mind knowing their vehicle is well-protected.